Do You Have to Bore Sight a Rifle Scope? Clear Answers and Practical Methods
You don’t have to bore sight a rifle scope every time, but doing it saves time and ammo when sighting-in at 100 yards. Bore sighting helps you get your scope roughly aligned with the barrel so your first rounds land near the target. This method suits new rifle owners, hunters mounting scopes for the first time, and anyone wanting quicker sight-in sessions.
This article explains what bore sighting means, why it helps, common methods to do it, and practical steps for beginner and intermediate shooters. It also covers safety tips and how to adjust for different rifles and mounting setups.
Key Takeaways
- Bore sighting generally involves positioning your scope so shots will hit about 3 to 4 inches above the target at 100 yards.
- Most shooters bore sight rifles at 25 yards; handguns are often bore sighted between 5 to 15 yards for accuracy.
- The simplest bore sighting method is looking directly through the barrel to align with a nearby target.
- Adjust your scope elevation to move point of impact up if your shots land low after bore sighting.
- Measure the exact bore sighting distance by counting paces or using a tape measure to mark 25 yards accurately.
- After bore sighting, securely tighten scope rings before live-fire sighting at longer distances like 100 yards.
Is Bore Sighting a Rifle Scope Always Necessary?

Bore sighting a rifle scope is not mandatory, but it is highly recommended to save time, effort, and ammunition during the sight-in process. The primary purpose of bore sighting is to align your scope close to the rifle’s bore axis so that your shots hit paper at your initial range, usually 100 yards. Without bore sighting, you risk wasting ammo and time trying to find your target through the scope blindly. Bore sighting is especially important if you’ve just mounted a new scope, changed scopes, or adjusted your scope rings. It sets a solid baseline for zeroing the rifle and ensures greater accuracy when you begin live-fire sighting.
In some cases, bore sighting may not be absolutely necessary. For instance, if you have a factory-mounted, pre-zeroed scope or a rifle with iron sights already accurately zeroed from the factory, you might skip bore sighting. Experienced shooters familiar with their rifle and scope setup might also opt to go directly to live-fire zeroing if they are confident their mounting and scope alignment are precise. However, skipping bore sighting increases the risk of missing the target or wasting ammunition during zeroing, especially for new or less experienced shooters.
The best time to bore sight is right after mounting or repositioning a scope and before live ammunition is used at the shooting range. For routine maintenance, bore sighting should be repeated whenever you adjust the scope significantly, replace parts like scope rings, or after transporting and storing the rifle in a way that might disturb the scope’s position. A good rule of thumb is to bore sight before any serious shooting session if you suspect your zero might have shifted. This approach ensures your scope and barrel stay in alignment and shooting remains accurate.
How bore sighting works is straightforward. You start by placing your rifle in a stable rest and centering the rifle’s open bore on a visible target, typically placed 25 yards away for rifles. Then you adjust your scope’s windage and elevation knobs until the reticle matches that same target image. This physical adjustment synchronizes the scope’s point of aim with the rifle’s bore line, bringing you on paper before live firing. You can perform this by simply looking through the barrel (the “look through the barrel” method) or use a laser bore sight tool for quicker, more precise alignment.
While bore sighting does not guarantee perfect zero, it minimizes the amount of live ammunition needed and frustration at the range. One limitation is that bore sighting accuracy depends on holding the rifle steady and the quality of your sighting method. A solid rifle rest and calm patience make a big difference; otherwise, your initial alignment might be off. Laser bore sighters cost around $30 to $60 but provide closer-to-center results than visual bore sighting, which can be off by several inches at 25 yards due to parallax and eye positioning errors.
In summary, bore sighting is a recommended step for most rifle scope setups, especially new installations or significant adjustments. It acts as an important preliminary step to the full zeroing process by saving ammo and effort while making your initial shots more productive and on target. You can skip it only when you trust your scope’s factory zero or already have a well-established setup, but this is less common for new or adjusted rifles. Frequent bore sighting before serious shooting sessions provides confidence and consistent accuracy on target.
What Does Bore Sighting a Rifle Scope Mean and How It Works

Bore sighting a rifle scope means aligning the sighting system directly with the firearm’s barrel or bore. The purpose is to make sure the scope’s reticle is roughly pointed where the bullet will go when fired. This initial alignment does not require shooting but gives a strong visual starting point that boosts shooting accuracy significantly. It is done by either visually lining up through the barrel at a distant target or by using tools like laser bore sighters that project a reference point matching the bore’s axis.
The principle behind bore sighting is simple: the rifle’s bore represents the bullet’s path when it leaves the barrel, and the scope or sights must match that line to hit where you aim. If the scope and bore are misaligned, the bullet will strike off-center, especially over longer distances. Boresighting reduces this error by ensuring the scope’s sight picture is as close as possible to the barrel’s point of aim before live firing begins. This step reduces wasted ammunition and frustration at the range during zeroing.
For example, if you bore sight a rifle at 25 yards, your point of impact might only be a few inches off. On the other hand, not bore sighting and starting directly at 100 yards may result in shot groups several feet away from the target. Say your rifle’s barrel aligns so hitting dead center at 25 yards correlates to an adjustment of 1 minute of angle (MOA) correction on the scope. Without bore sighting, a 4-inch impact shift at 25 yards might translate to roughly 16 inches at 100 yards, making initial live fire zeroing more difficult.
Bore sighting is cost-effective and does not require special skills, though tools like laser bore sighters can be purchased for $30 to $80. Basic bore sighting might just involve removing the bolt, looking through the barrel at a target 15 to 25 yards away, and adjusting the scope until the reticle aligns with that point. This process can be quicker than live-fire sighting alone and uses less ammunition. However, bore sighting itself does not replace zeroing with live rounds, which accounts for factors like bullet drop, wind, and rifle-specific variations.
Good bore sighting results mean your first live-fire shots land close to the intended target, usually within a few inches at 25 yards. This makes the final zeroing adjustments faster and more efficient. Without bore sighting, you might spend more time and rounds correcting large initial distances off target. While bore sighting tools can vary, ranging from manual visual alignment to laser and collimator devices, the basic outcome is always better initial accuracy set-up for your scope.
Always ensure your rifle is unloaded and the action is open before starting bore sighting to avoid accidents.
Common Bore Sighting Methods Explained
Bore sighting a rifle scope can be done using visual alignment, laser devices, or collimators. Each method has its pros and cons depending on your rifle type, budget, and precision needs. Choosing the right method will help you get your scope roughly aligned before fine-tuning at the range.
Visual Bore Sighting Basics
Visual bore sighting involves looking directly through the barrel of the unloaded rifle to align it with a target. This old-school method requires you to remove the bolt and position the rifle on a stable rest while peering through the bore toward a target. You then adjust the scope reticle to match where the barrel points.
This method is low cost and requires no special tools, but it can be less precise because the bore is often dark and narrow, making exact aiming difficult. You may find the bore sighting will result in a scope aim point several inches above the target at typical ranges, like 3 to 4 inches at 100 yards. It works reasonably well for larger calibers or those with simple optics, but is less efficient for rifles with muzzle devices or complicated mechanisms.
Laser Bore Sight Types and Use
Laser bore sighters come in several types: in-chamber, muzzle-inserted, and magnetic base. These devices project a laser beam from the rifle’s bore center onto the target, letting you easily align your scope reticle to the laser dot. They are popular due to ease of use and reliable repeatability.
For rifles with muzzle brakes, in-chamber laser bore sighters are preferred since they fit inside the chamber, avoiding removal of the brake. The procedure involves inserting the laser unit into the barrel and turning it on, usually with a rotating knob. Then, adjust your scope to line up with the laser dot on the target at your chosen distance. This method usually costs from $30 to $100 depending on brand and features.
Magnetic laser bore sighters attach to the barrel muzzle using a magnet, letting you skip chamber insertion. They generally work well for basic rifles without complex muzzle attachments. The laser method gets you much closer to true zero sight quickly compared to visual bore sighting, but always requires a range confirmation shot.
Collimator Boresighters and Features
Collimator bore sighters like those made by Bushnell work by screwing into or resting at the muzzle end, projecting an illuminated reticle or crosshair inside the scope. This differs from lasers by illuminating an aiming point within the scope lens itself, letting you zero the scope reticle without outside laser projection. They often screw into a muzzle adapter or slip into the barrel depending on the model.
This approach provides a steady, parallax-free reference point, usually improving alignment precision over simple visual bore sighting. Collimators cost around $50 to $150. The main downside is they may not fit all barrel types and can be expensive or cumbersome for rifles with muzzle devices. Some models offer adjustable reticle patterns for flexibility. For precision rifles, a collimator bore sighter is a solid investment for initial scope setup. The following table compares key features of these three bore sighting methods to help you pick the best for your rifle and budget:
| Method | How It Works | Pros | Cons | Typical Cost | Best for Rifle Types |
|---|---|---|---|---|---|
| Visual Bore Sighting | Look through barrel to target, adjust scope | No cost, simple | Less precise, hard with muzzle brakes | Free | Basic bolt actions, no muzzle device |
| Laser Bore Sighting (In-Chamber) | Insert laser into chamber, project dot on target | Easy, accurate, fits muzzle brakes | Needs chamber access, batteries required | $40 – $100 | Lever actions, rifles with brakes |
| Laser Bore Sighting (Muzzle/Magnetic) | Attach laser magnetically at muzzle | Simple, no chamber access needed | Can’t use with muzzle brakes | $30 – $70 | Standard barrels without brakes |
| Collimator Bore Sighter | Illuminated reticle inside scope lens | Precise alignment, no laser spot needed | Expensive, may need adapters | $50 – $150 | Precision rifles, bolt actions |
Choose visual bore sighting if you prefer a no-cost method and have a simple rifle without complex muzzle attachments. Laser bore sighters provide quicker, more user-friendly alignment, especially for rifles with muzzle brakes if you use the in-chamber type. Collimator bore sighters offer the highest precision but come with added cost and may require adapters.
Step-by-Step Bore Sighting Process for Rifle Scopes
Bore sighting a rifle scope involves mounting your scope securely, aligning the bore with a 25-yard target, and adjusting the scope’s windage and elevation knobs until the crosshairs match the bore’s line of sight. This process varies by rifle type but generally requires removing the bolt for bolt-action rifles and AR-15s and careful scope adjustments to get your shots close before live firing at longer distances.
Preparing Your Rifle and Scope
Start by mounting your rifle scope firmly using stable rings and bases to ensure it won’t move during bore sighting. Accuracy depends on solid mounting. For bolt-action rifles and AR-15s, remove the bolt to look directly down the bore. Lever action rifles might not require bolt removal depending on the design, but check your specific model for best access to the bore.
Laser bore sighters, if used, attach to the chamber or the muzzle, emitting a laser dot to help align your scope. Make sure batteries are fresh and the laser is stable before you begin.
Aligning the Rifle Bore with the Target
Position your rifle on a steady rest or shooting bench, aiming at a clearly marked 25-yard target. This distance balances ease of alignment with practical correction for 100-yard zeroing. Look down the bore, physically for bolt-action rifles or AR-15s with the bolt removed, and center the target within the bore’s view.
This stage sets the foundation for scope adjustments. For AR-15s, detach the upper receiver from the lower to remove the bolt easily and get a clean, unobstructed bore view. Avoid twisting or shifting the rifle during this process to maintain alignment accuracy.
Adjusting the Scope for Bore Alignment
After centering the bore on the target, look through the scope and note where the crosshairs point in relation to the target dot or laser. Use the elevation and windage turrets to move the crosshairs. For example, if your scope uses ¼ MOA clicks and the impact is 1 inch right at 25 yards, turn the windage turret four clicks to the left (towards the “L” direction). Adjust elevation upward to compensate for the height difference between the bore and the scope, on AR-15s with scopes about 2.5 inches above the bore, expect an impact roughly 1.5 inches low at 25 yards when initially bore sighted. Repeat this process by firing groups of three shots at the target, then correcting the scope alignments to center the shots until the group is consistently on target.
Verifying and Securing Your Setup
Once your scope crosshairs align closely with the bore sight at 25 yards, replace the bolt securely if removed. Verify the scope’s alignment by confirming stable reticle centering without shifting the rifle setup. Tighten all mounting screws to the manufacturer’s recommended torque settings to avoid scope movement.
Perform a final check by firing at longer distances like 50 or 100 yards to adjust fine zeroing. Good bore sighting cuts down on time and ammunition needed for this final zeroing process. If adjustments appear inconsistent, inspect mounting parts or retake the bore sighting steps to ensure no movement occurred during setup.
- Mount your scope securely using proper rings and bases.
- Remove the bolt (bolt action, AR-15) or access the bore as applicable.
- Place a 25-yard target and steady your rifle on a rest or bench.
- Look down the bore, centering the target within the barrel’s view.
- Look through the scope and use windage and elevation turrets to align crosshairs on the target.
- Adjust turrets in precise increments, following your scope’s click value (typically ¼ MOA per click).
- Replace the bolt and tighten mounting hardware to prevent movement.
- Confirm alignment with live firing at longer distances and fine-tune as needed.
Choosing the Right Distance for Bore Sighting a Rifle
Choosing the right distance for bore sighting your rifle scope greatly affects the ease of alignment and the accuracy of your subsequent zeroing. A common choice is 25 yards. This short distance allows you to quickly adjust the scope and see where your bullet would impact without needing a large shooting area. Since 25 yards is about one-quarter of the standard 100-yard zero, scope adjustments at this range translate to bigger hits on target, the bullet’s impact moves roughly four times as far per click of adjustment at 25 yards compared to 100 yards. This means you can fine-tune your scope more precisely and save time and ammo before moving to longer distances.
Suppose your goal is to zero your rifle at 100 yards. If bore sighting at 25 yards, you should aim to be about one inch low on the target for most rifles with scopes mounted 1.5 to 2 inches above the bore. This offset accounts for the bullet’s trajectory and sight height, reducing the amount of scope movement needed once you move to the 100-yard range. For example, if you adjust your aim to hit 1 inch below the bullseye at 25 yards, the bullet should land very close to the center at 100 yards with minimal additional scope adjustment.
Longer bore sighting distances, such as 50 or 100 yards, are also possible but come with tradeoffs. Shooting at 50 or 100 yards requires more space and slightly more ammunition, and the bullet’s impact shifts less per scope adjustment click, which can make initial alignment slower. However, bore sighting at these distances offers a more direct preview of your zero, potentially requiring fewer tweaks once you reach your final zero distance. For example, bore sighting at 100 yards means the first shot should hit very close to your zero, you may only need a small correction to zero fully.
Indoor bore sighting is an option as long as you can safely position a target at a suitable distance, typically around 25 yards. This is convenient for initial setup and saves time and effort on the range. Remember that bore sighting is just a starting point; environmental factors, ammunition variations, and minor rifle or scope quirks can affect your point of impact once you move to live-fire zeroing at your intended distance.
Start your bore sighting at 25 yards aiming one inch low for most rifles with typical scope mount heights; this approach makes final zeroing at 100 yards faster and more precise.
Safety Tips and Best Practices During Bore Sighting
Before you begin bore sighting your rifle scope, unloading your firearm is the most important safety step. Double-check to confirm there is no ammunition in the chamber or magazine. Treat every rifle as if it were loaded until you verify otherwise. Keep the muzzle pointed in a safe direction throughout the process.
Setting up your rifle on a stable rest prevents unwanted movement that can cause inaccurate sighting or accidents. Professional rifle rests are available, but sandbags or a shooting bench can also create a firm platform. A steady hold reduces the risk of slipping and ensures consistent alignment when you look through the bore and scope.
Eye protection is essential during bore sighting, especially if you plan to fire test shots shortly after. Although bore sighting itself doesn’t involve live fire, accidental discharge remains a risk if safety steps are neglected. Wearing safety glasses shields your eyes from any unexpected debris or cartridge ejection.
- Unload the rifle and remove all ammunition from the area
- Verify the chamber is empty by visually and physically inspecting it
- Use a solid rest such as a professional stand, sandbags, or bench rest
- Keep your muzzle pointed in a safe direction at all times
- Wear eye protection to guard against debris or unexpected issues
- Handle the rifle calmly and avoid sudden movements to prevent accidental discharges
- Check your surroundings to ensure no one is downrange or near the target area
Common bore sighting mistakes include forgetting to unload the rifle and moving the firearm while looking through the bore. Always take a moment to confirm the gun is safe before continuing. Securing the rifle prevents it from shifting, which would misalign your scope and require restarting the process. Avoid rushing as haste contributes to errors and safety risks.
Good handling means keeping your fingers off the trigger until you are ready to fire live rounds at the range. Never rely on pointing the firearm at a target as a substitute for proper mechanical safety measures. Following these safety practices protects you and those around you and leads to more accurate bore sighting results.
Common Bore Sighting Problems and How to Fix Them
A common problem during bore sighting is a loose scope mount. When mounts or rings aren’t tightened correctly, the scope can shift under recoil or even while aligning the bore sight. To fix this, use a torque wrench or appropriate screwdriver and tighten the mounts to the manufacturer’s recommended torque. Typically, this ranges from 15 to 25 inch-pounds, depending on the mount and rifle. Avoid overtightening, which can damage the scope tube or mounts.
Misalignment between the bore and scope axis is another frequent issue. This often happens because the scope is not properly aligned in the rings before final tightening. Once mounted, look through the scope while adjusting it in the rings to visually center the reticle. A scope level on a flat surface or bore sight can help verify that the reticle is square to the rifle. Small adjustments here prevent large zeroing errors downrange.
Choosing the wrong distance for bore sighting also causes errors. Common bore sighting distances range from 10 to 25 yards for initial alignment, but the ideal distance depends on the scope’s magnification and the rifle’s intended zero. For example, using 25 yards on a high-magnification scope gives a better initial approximate zero. After bore sighting, you must zero the rifle at the actual intended distance, often 100 yards. Too close or too far distances make it harder to judge the scope’s adjustment needs correctly.
Incorrectly adjusting the scope’s turrets during bore sighting leads to poor alignment. Use the specific turret clicks for your scope’s adjustment increments. For example, 1/4 MOA per click equals about 0.25 inches movement at 100 yards. Count clicks carefully instead of guessing positions by eye. Recheck turret stops and zero marks to ensure no accidental rotation occurred during mounting. After initial adjustments, confirm bore sighting by checking if the reticle holds steady on the same target point after moving the rifle.
Success in bore sighting shows when the reticle is roughly on target and the bullet impacts within a few inches of the point of aim at your chosen bore sighting distance. This does not replace final zeroing with live fire but makes it faster and more efficient. Bore sighting that doesn’t produce approximate alignment calls for revisiting each step: check mount tightness, scope alignment in the rings, correct distance, and careful turret adjustments. This check will often reveal where to correct the setup.
Adjusting for Different Rifle Types and Equipment Features
Bore sighting techniques vary depending on your rifle type and any hardware attached to it. Different rifles require specific steps for accurate alignment, and accessories like muzzle brakes may affect your approach. A laser bore sight or traditional visual bore sight can work, but the best method depends on your firearm’s design and what’s practical to remove or access.
Bore Sighting Bolt-Action Rifles
Bolt-action rifles are typically the easiest to bore sight because you can remove the bolt to look straight through the barrel. This allows you to visually align the scope reticle with the bore’s center on a target placed at 25 to 50 yards. Removing the bolt is safer, gives a direct view, and requires no special equipment, but it requires careful handling to avoid damaging the bolt or receiver. Once visually aligned, you can install a laser bore sight or adjust your scope accordingly.
You may insert a laser bore sight into the chamber instead of removing the bolt. This method works well and is often faster, but it may cost $20 to $125 depending on the model. Either approach helps you get on paper with fewer shots fired, saving time and ammunition at the range.
Bore Sighting AR-15 and Tactical Rifles
AR-15s usually allow easy chamber access, so you can use in-chamber laser boresighters designed for .223 or 5.56 calibers, typically costing under $20. Insert the laser device into the chamber and activate it; the laser projects a dot on your target, showing where the barrel is aimed. Unlike bolt-action rifles, ARs often don’t require bolt removal for bore sighting, which speeds up the process.
Using a laser is especially helpful because the AR’s gas system and barrel length can make visual bore sighting through the muzzle difficult. Another option is to remove the upper receiver and use the barrel’s chamber end to look through, but this requires some technical skill and tools, so most users prefer laser boresighting. After aligning the bore, you adjust the scope turrets to match the laser dot’s point of impact at your chosen distance.
Considerations for Lever-Actions and Muzzle Brakes
Lever-action rifles often don’t have removable bolts or easy access to the chamber for visual bore sighting. A laser boresight inserted through the muzzle helps here. It projects a dot onto the target without removing any parts, which is the simplest option. Removing a muzzle brake to bore sight is usually unnecessary unless the hardware blocks the laser or sight line.
Muzzle brakes can affect bore sighting by slightly shifting the point where the laser projects from the barrel’s end. Leaving the muzzle brake on is generally recommended to replicate your rifle’s normal shooting setup. Your laser tool allows you to bore sight through the muzzle brake without taking it off. You’ll need to carefully remove the muzzle brake using the right wrenches or tools if it doesn’t fit. Remember, repeatedly removing a muzzle brake can loosen it or cause damage over time, so only do this if absolutely necessary.
Always handle the rifle safely and confirm the chamber and magazine are clear before inserting any bore sighting device through the muzzle or chamber.
Step-by-Step Action Plan for Bore Sighting Your Rifle Scope
Follow these steps to bore sight your rifle scope accurately and efficiently, setting you up for successful shooting sessions.
- Before You Start: Ensure the rifle is unloaded and the chamber is clear for safety.
- Initial Setup: Mount the scope securely on your rifle using proper rings and bases, then tighten all screws to manufacturer specifications.
- Day 1: Use a bore sighting tool (laser or collimator) aligned through the barrel to get the scope reticle close to the bore axis.
- Day 2: Adjust the scope turrets to center the reticle on the bore sighting point, verifying your adjustments at a short distance (10-25 yards).
- Day 3: Head to a shooting range and fire three-shot groups at a target 25 to 50 yards away to confirm and refine the zero.
- Week 1: Fine-tune windage and elevation adjustments based on bullet impact, moving the target to your preferred zeroing distance (100 yards is common for rifles).
- Ongoing: Regularly check scope mounting and sight alignment, especially after transporting or using the rifle.
Frequently Asked Questions
Do You Have to Bore Sight a Rifle Scope Every Time You Mount a New Scope?
No, but bore sighting a new scope saves time and ammo by helping you get on paper quickly at 25 yards before final sight-in at 100 yards. It’s especially useful if your scope or mounts are new or were removed.
Can You Bore Sight a Rifle Scope Without Any Special Tools?
Yes, the “look through the barrel” method lets you bore sight without extra tools by centering the target through the open bore and scope. This approach works well if you lack a boresighter but requires a steady rest and patience.
How Accurate Is Bore Sighting Compared to Live Firing at the Range?
Bore sighting aligns your scope roughly with the barrel, but actual precision depends on live fire sight-in. Bore sighting is a starting step, saving you ammunition and time before fine-tuning with shots at 100 yards.
Is Bore Sighting Necessary for All Types of Rifles?
While not mandatory, bore sighting benefits all rifles with scopes, especially bolt-action and hunting rifles, to speed sight-in. Some semi-automatic or factory zeroed scopes may need less frequent bore sighting, but it never hurts to check.
Can Bore Sighting Damage My Rifle or Scope?
Proper bore sighting itself won’t cause damage since it’s done without firing live rounds. Always follow safety rules, ensure the firearm is unloaded, and avoid forcing scope adjustments to prevent wear or damage.
Does Weather or Lighting Affect Bore Sighting Accuracy?
Yes, poor lighting or uneven terrain can impair your ability to accurately line up the bore and scope. Pick a well-lit, stable shooting bench or rest, and set up a clear target to improve bore sighting results.
Key Points to Remember
Bore sighting your rifle scope is a helpful step but not always mandatory. It saves time and ammunition by getting your scope close to the correct zero before live firing. Begin with careful bore sighting using a proper tool at home, then confirm and fine-tune your point of impact at the range. Taking this one extra step improves your shooting confidence and accuracy every time you head out.